LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 1994 >> B3000 Base, 2D Pickup, Automatic >> Repair and Diagnosis >> Steering >> Power Steering >> Steering System - Power >> Testing >> Pressure Test >> Preparation

Pressure Test: Preparation

  1. With belt tension correct, disconnect power steering pump pressure line. Keep line end raised to prevent fluid loss. Connect pressure line of gauge to power steering pump fitting. Connect other line from valve side of tester to steering gear inlet.
  2. Open valve. Run engine until fluid reaches normal operating temperature of 165-175°F (74-79°C). Check fluid level. Add fluid as necessary.
scientia non olet · About LEMON Manuals