LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 1994 >> 626 DX, Automatic >> Repair and Diagnosis >> External Pages >> Different car >> Section 16 (Engine Controls - Adjustments) >> Throttle Position (TP) Sensor >> Inspection (M/T)

Inspection (M/T)

WARNING: This page is about a different car, the 1994 Mazda MX-5 Miata. However, it is still accessible from the selected car via links, so may be relevant.
  1. Disconnect TP sensor connector. Insert feeler gauge of specified thickness between throttle lever and throttle stop screw. See TP SENSOR CONTINUITY (M/T) table.
  2. Connect ohmmeter between specified terminals of TP sensor connector. See Figure. If continuity is not as specified, adjust TP sensor. See ADJUSTMENT procedure.
scientia non olet · About LEMON Manuals