LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 1993 >> Navajo LX, RWD, Automatic >> Repair and Diagnosis >> Steering >> Manual Steering >> Steering System - Power Recirculating Ball >> Overhaul >> Control Valve Housing >> Disassembly

Control Valve Housing: Disassembly

  1. Using Puller Attachment (T58L-101-B ), Slide Hammer (4902-23-630B ) and Adapter (49-UN11-01 ), remove dust seal from rear of valve housing. Discard seal. Remove snap ring from valve housing. See Figure.
  2. Turn valve housing over. Insert Driver Handle (T65P-3524-A2 ) and Bearing/Seal Remover (T65-3524-A3 ) in valve housing opposite oil seal. Tap bearing and seal out of housing. Discard seal. If damaged, remove inlet and outlet tube seats using Tube Seat Remover (T74P-3504-L ).
scientia non olet · About LEMON Manuals