LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 1993 >> Navajo DX, RWD, Standard >> Repair and Diagnosis >> Body & Frame >> Power Windows >> Adjustments >> Window Mechanism

Window Mechanism

  1. Remove door trim panel and water shield. See DOOR TRIM PANEL & WATER SHIELD  under REMOVAL & INSTALLATION. Lower glass about 3" (75 mm) from full UP position.
  2. Loosen nut and washer assemblies retaining equalizer bracket to door inner panel. Open door and place hands on each side of glass. Carefully pull glass fully into door glass run assembly at "B" pillar.
  3. Tighten nut and washer. Apply downward pressure on equalizer bracket and tighten nut and washer to 7-10 ft. lbs. (9-14 N.m). Cycle door glass to ensure proper functioning and door fit. Install water shield and trim panel. See DOOR TRIM PANEL & WATER SHIELD  under REMOVAL & INSTALLATION.
scientia non olet · About LEMON Manuals