LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 1993 >> Navajo DX, RWD, Automatic >> Repair and Diagnosis (Single Page) >> Brakes >> Traction Control >> Anti-Lock Brake System - 4-Wheel >> Bleeding Brake System >> Notes

Bleeding Brake System: Notes

NOTE: Only bleed HCU when unit has been replaced. Follow conventional bleeding procedures when HCU has not been replaced.
CAUTION: DO NOT allow reservoir to run dry during brake bleeding procedure. Brake fluid will damage painted surfaces. If brake fluid is spilled, immediately clean surface. Use only DOT 3 brake fluid and DO NOT mix with any other types.

Bleed hydraulic system whenever air has been introduced into system. Bleed master cylinder and brakes at all 4 wheels if master cylinder lines have been disconnected or master cylinder has run dry. Bleed brakes with pressure bleeding equipment or by manually pumping brake pedal while using bleeder tubes. Always bleed brakelines in sequence. See BLEEDING SEQUENCE.

scientia non olet · About LEMON Manuals