LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 1993 >> MX-3 Base, Automatic >> Repair and Diagnosis >> Steering >> Steering Column >> Removal & Installation >> Ignition Switch/Steering Lock Assembly >> Removal & Installation

Removal & Installation

  1. Remove steering wheel and combination switch. See STEERING WHEEL & HORN PAD and COMBINATION SWITCH  . Disconnect ignition switch connectors. Remove key interlock cable from ignition switch/steering lock assembly (if equipped).
  2. Using a hammer and chisel, make a groove in ignition switch/steering lock assembly shear screws. Remove 2 shear screws with screwdriver. Remove ignition switch/steering lock assembly. To install, reverse removal procedure. Tighten NEW shear screws until heads break off.
scientia non olet · About LEMON Manuals