Belt Deflection
Measure belt deflection in center of longest pulley-to-pulley span. See BELT DEFLECTION SPECIFICATIONS table. If belt deflection is not as specified, adjust as necessary.
BELT DEFLECTION SPECIFICATIONS
| Application | (1) Deflection - In. (mm) | ||||
|---|---|---|---|---|---|
| B2200 | |||||
| New Belt | 0.28-0.31 (7.0-8.0) | ||||
| Used Belt | 0.31-0.35 (8.0-9.0) | ||||
| B2600i | |||||
| New Belt | 0.39-0.47 (10.0-12.0) | ||||
| Used Belt | 0.43-0.51 (11.0-13.0) | ||||
| Miata | |||||
| New Belt | 0.31-0.35 (8.0-9.0) | ||||
| Used Belt | 0.35-0.39 (9.0-10.0) | ||||
| MPV | |||||
| 4-Cylinder | |||||
| New Belt | 0.39-0.47 (10.0-12.0) | ||||
| Used Belt | 0.43-0.57 (11.0-13.0) | ||||
| V6 | |||||
| New Belt | 0.35-0.39 (9.0-10.0) | ||||
| Used Belt | 0.39-0.47 (10.0-12.0) | ||||
| MX-3 | |||||
| 4-Cylinder | |||||
| New Belt | 0.22-0.28 (5.5-7.0) | ||||
| Used Belt | 0.24-0.30 (6.0-7.5) | ||||
| V6 | |||||
| With A/C | |||||
| New Belt | 0.22-0.26 (5.5-6.5) | ||||
| Used Belt | 0.26-0.30 (6.5-7.5) | ||||
| Without A/C | |||||
| New Belt | 0.24-0.28 (6.0-7.0) | ||||
| Used Belt | 0.28-0.31 (7.0-8.0) | ||||
| MX-6 & 626 | |||||
| 4-Cylinder | |||||
| New Belt | 0.26-0.28 (6.5-7.0) | ||||
| Used Belt | 0.28-0.35 (7.0-9.0) | ||||
| V6 | |||||
| With A/C | |||||
| New Belt | 0.22-0.26 (5.5-6.5) | ||||
| Used Belt | 0.26-0.30 (6.5-7.5) | ||||
| Without A/C | |||||
| New Belt | 0.24-0.28 (6.0-7.0) | ||||
| Used Belt | 0.28-0.31 (7.0-8.0) | ||||
| Protege & 323 | |||||
| New Belt | 0.31-0.35 (8.0-9.0) | ||||
| Used Belt | 0.35-0.39 (9.0-10.0) | ||||
| RX7 | |||||
| New Belt | 0.24-0.31 (6.0-8.0) | ||||
| Used Belt | 0.28-0.35 (7.0-9.0) | ||||
| 929 | |||||
| New Belt | 0.39-0.47 (10.0-12.0) | ||||
| Used Belt | 0.43-0.51 (11.0-13.0) | ||||
|
|||||