All Functions Of Driver Seat Inoperative
- Measure voltage at Blue wire terminal of control switch connector. If battery voltage is not present, repair Blue wire. If battery voltage is present, disconnect control switch connector. Check continuity between ground and Black wire terminal of control switch connector.
- If there is no continuity, repair Black wire. If there is continuity, reconnect control switch connector. Hold control switch in specified position. See VOLTAGE TEST table. Measure voltage at specified wire terminals of control switch connector.
- If battery voltage is not present at all terminals, replace control switch. If battery voltage is present at all terminals, hold control switch in specified position. See VOLTAGE TEST table.
- Measure voltage at specified wire terminals of seat motor connectors. If battery voltage is present at all terminals, replace seat motors. If battery voltage is not present at all terminals, repair wiring harness.