LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 1993 >> 626 ES, Automatic >> Repair and Diagnosis >> Engine Performance >> Remove, Overhaul & Install >> Engine Controls - Remove/Install/Overhaul >> Ignition System >> Crank Angle Sensor >> Removal & Installation (RX7)

Removal & Installation (RX7)

Disconnect negative battery cable. Remove drive belt. Remove crankshaft pulley and crank angle sensor plate. Remove nuts and sensor bracket. Disconnect electrical connectors. Remove crank angle sensors. To install, reverse removal procedure. Tighten sensor mounting nuts to specification. See TORQUE SPECIFICATIONS  table.

scientia non olet · About LEMON Manuals