LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 1993 >> 323 Base, 1.6 2, Automatic >> Repair and Diagnosis >> Engine Performance >> Remove, Overhaul & Install >> Engine Controls - Remove/Install/Overhaul >> Fuel System >> Throttle Body >> Removal & Installation (Except Navajo)

Removal & Installation (Except Navajo)

  1. On MPV 3.0L, drain about 2 qts. (1.9 L) of coolant from cooling system. On all models, disconnect negative battery cable. Remove air intake tubes.
  2. Disconnect accelerator cable, coolant hoses and electrical connectors from throttle body as necessary. On 929, remove by-pass air control valve. On all models, remove throttle body. To install, reverse removal procedure using NEW throttle body gasket. See the TORQUE SPECIFICATIONS  table.
scientia non olet · About LEMON Manuals