Anti-Lock Brake System
- Description
- Operation
- Anti-Lock Brake Safety Precautions
- Bleeding Brake System
- Trouble Shooting
- Diagnosis & Testing
- Notes
- Retrieving Codes
- System Testing
- Notes
- ABS-1 (One Flash Should Not Occur)
- ABS-2 (Open Isolation Solenoid Circuit)
- ABS-3 (Open Dump Solenoid Circuit)
- ABS-4 (Solenoid Valve Switch Closed)
- ABS-5 (System Dumps Too Many Times; Condition Occurs While Making Normal Or Hard Stops)
- ABS-6 (Speed Sensor Signal Rapidly Cuts In & Out; Condition Only Occurs While Driving)
- ABS-7 (Shorted Isolation Solenoid Ground Circuit)
- ABS-8 (Shorted Dump Solenoid Ground Circuit)
- ABS-9 (High Speed Sensor Resistance)
- ABS-10 (Low Speed Sensor Resistance)
- ABS-11 (Stoplight Switch Always Closed Or Stoplight Switch Circuit Defective; Condition Indicated Only When Driving Faster Than 35 MPH)
- ABS-12 (12 Flashes Should Not Occur)
- ABS-13 (Control Unit Speed Circuit Phase Lock Loop Failure Detected During Control Unit Self-Test)
- ABS-14 (Control Unit Program Check Sum Failure Detected During Control Unit Self-Test)
- ABS-15 (Control Unit RAM Failure Detected During Control Unit Self-Test)
- ABS-16 (16 Flashes Should Not Occur)
- Component Testing
- Removal & Installation
- Adjustments
- Torque Specifications
- Wiring Diagrams