LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 1992 >> B2200 Base, 2D Pickup, Standard >> Repair and Diagnosis >> Transmission >> Automatic Trans >> Servicing - A/T >> Adjustments >> Neutral Safety Switch

Neutral Safety Switch

  1. Place gearshift lever in "N" position. Ensure gearshift linkage is adjusted correctly. See GEARSHIFT LINKAGE  . Loosen neutral safety switch mounting bolts at transmission. Remove screw from alignment pin hole at bottom of switch (if equipped).
  2. Insert a 5/64" (2.0 mm) alignment pin (or drill bit) through alignment holes.
  3. Tighten all mounting bolts to specification. See TORQUE SPECIFICATIONS  . Remove alignment pin. Install alignment pin hole screw (if equipped), and check switch operation. Vehicle should start only with gearshift in "P" or "N" position.
scientia non olet · About LEMON Manuals