LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 1992 >> B2200 Base, 2D Pickup, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 3 (Wheel Alignment Specifications & Procedures) >> Wheel Alignment Procedures >> Camber Adjustment >> 929

Camber Adjustment: 929

WARNING: This page does not describe the selected car, but rather 11 other vehicles, including the 1991 Mazda RX-7, 1991 Mazda Protege, 1991 Mazda Navajo, 1991 Mazda MX-6, and 1991 Mazda MX-5 Miata. However, it is still accessible from the selected car via links, so may be relevant.

Raise and support front of vehicle. Remove upper strut-to-body nuts. Push strut mounting block downward, and turn to desired position. Reinstall and tighten nuts. See Fig 1.

CAMBER ADJUSTMENT (929)

Mark Change From Standard
A 0°
B 15/32°
C 15/32°
Fig 1: Adjusting Camber & Caster (MPV, MX-6, RX7, 626 & 929) Courtesy of Mazda Motors Corp.
G92G00041
Fig 2: Adjusting Camber & Caster (Navajo) Courtesy of Mazda Motors Corp.
G92C00039
Fig 3: Camber/Caster Adjuster Selection Chart (Navajo) Courtesy of Mazda Motors Corp.
G92A00038
Fig 4: Adjusting Camber & Caster (Protege & 323) Courtesy of Mazda Motors Corp.
G92E00040
scientia non olet · About LEMON Manuals