LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 1992 >> B2200 Base, 2D Pickup, Standard >> Repair and Diagnosis >> Engine Performance >> System >> Engine Controls - Tests W/Codes - 2.2L >> Self-Diagnostic System >> Clearing Codes

Clearing Codes

  1. Disconnect negative battery cable. Depress brake pedal for at least 5 seconds. Reconnect battery cable.
  2. Ground test connector with jumper wire. Turn ignition on, but do not start engine for 6 seconds. Start and run engine at 2000 RPM for 2 minutes. Verify no codes are displayed.
scientia non olet · About LEMON Manuals