Test C: Passenger's &/Or Rear Windows Inoperative Using Main Switch, Okay Using Sub-Switches
NOTE:
Use only main switch during testing.
- Turn ignition on. Check voltage at the following wire terminals of main switch connector. If battery voltage is present at all terminals, go to next step. If battery voltage is not present at all terminals, check main switch. See MAIN SWITCH
under COMPONENT TESTS.
- Green/White Wire (Main Switch/Passenger's In Up Position)
- Red/White Wire (Main Switch/Passenger's In Down Position)
- On 626, Blue/White Wire (Main Switch/Left Rear In Up Position)
- On 626, Yellow/White Wire (Main Switch/Left Rear In Down Position)
- On 626, Green/Yellow Wire (Main Switch/Right Rear In Up Position)
- On 626, White/Red Wire (Main Switch/Right Rear In Down Position)
- Check voltage at following wire terminals of sub-switch. If battery voltage is present at all terminals, go to next step. If battery voltage is not present at any terminal, repair wiring between main switch and suspect sub-switch.
- Green/White Wire (Main Switch/Passenger's In Up Position)
- Red/White Wire (Main Switch/Passenger's In Down Position)
- On 626, Blue/White Wire (Main Switch/Left Rear In Up Position)
- On 626, Yellow/White Wire (Main Switch/Left Rear In Down Position)
- On 626, Blue/White Wire (Main Switch/Right Rear In Up Position)
- On 626, Yellow/White Wire (Main Switch/Right Rear In Down Position).
- Check voltage at Green terminal of each sub-switch while operating main switch down and Red terminal of each sub-switch while operating main switch up. If battery voltage is present at all terminals, go to next step. If battery voltage is not present at any terminal, check sub-switch. See SUB-SWITCH under COMPONENT TESTS.
- Check voltage at Green terminal of each power window motor while operating main switch down and Red terminal of each power window motor while operating main switch up. If battery voltage is present at all terminals, check power window motor. See POWER WINDOW MOTOR under COMPONENT TESTS. If battery voltage is not present at any terminal, repair wiring between main switch and window motor.