LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 1992 >> 323 Base, Standard >> Repair and Diagnosis >> Engine Performance >> Remove, Overhaul & Install >> Engine Controls - Remove/Install/Overhaul >> Fuel System >> Turbocharger >> Installation

Fuel System: Turbocharger: Installation

  1. Add .85 oz. (25 cc) of clean engine oil to oil inlet passage of turbocharger. Install turbocharger with NEW gasket between turbocharger and exhaust manifold.
  2. Tighten nuts and bolts to specification. See TORQUE SPECIFICATIONS table at end of article. To complete installation, reverse removal procedure. Prime oil system.
scientia non olet · About LEMON Manuals