LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 1992 >> 323 Base, Standard >> Repair and Diagnosis >> Engine Performance >> Remove, Overhaul & Install >> Engine Controls - Remove/Install/Overhaul >> Fuel System >> Fuel Rails & Injectors >> Installation

Fuel Rails & Injectors: Installation

  1. If injectors were removed, lubricate NEW injector "O" rings with light oil. DO NOT use silicone grease. Carefully install injectors into fuel supply manifold. Carefully install fuel supply manifold into lower manifold using NEW manifold gasket.
  2. Clean and oil fuel supply manifold bolt threads. Install fuel supply manifold bolts. Tighten bolts to specification. See TORQUE SPECIFICATIONS table at end of article. To complete installation, reverse removal procedure.
    Fig 1: Exploded View Of Fuel Supply Manifold Assembly (Navajo)
    G90E04613Courtesy of FORD MOTOR CO.
scientia non olet · About LEMON Manuals