LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 1992 >> 323 Base, Standard >> Repair and Diagnosis >> Engine Performance >> Remove, Overhaul & Install >> Engine Controls - Remove/Install/Overhaul >> Fuel System >> Fuel Line Connectors (NAVAJO) >> Disconnect (Spring Lock Coupler)

Disconnect (Spring Lock Coupler)

  1. Release fuel system pressure. See FUEL SYSTEM PRESSURE RELEASE. Remove locking (safety) clip (if equipped). Place Spring Lock Coupler Releaser (49-UN01-051 for 3/8" line; 49-UN01-052 for 1/2" line) over fuel line coupler. See Fig 1 .
  2. Push spring lock coupler releaser to release female fitting from garter spring. Pull spring lock coupler apart. Remove releaser.
    Fig 1: Disconnecting Spring Lock Coupler (Navajo)
    G113233Courtesy of FORD MOTOR CO.
scientia non olet · About LEMON Manuals