LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 1992 >> 323 Base, Automatic >> Repair and Diagnosis >> Engine Performance >> System >> Engine Controls - Basic Testing >> Fuel System >> Fuel Pressure (Fuel Injection) >> Circuit Opening Relay (Except MX-3 1.8L, Navajo & 929)

Circuit Opening Relay (Except MX-3 1.8L, Navajo & 929)

  1. With relay connected, ensure specified voltage is present at relay terminals. See CIRCUIT OPENING RELAY CIRCUIT VOLTAGES  table. For location of circuit opening relays, see CIRCUIT OPENING RELAY LOCATIONS  table.
  2. If voltages are okay, remove relay from vehicle. Check relay operation using a 12-volt battery source and perform resistance tests. See Figure .
scientia non olet · About LEMON Manuals