Except Navajo
- Start engine. On B2200 PFI, B2600i, Miata, MX-6 & 626, disconnect circuit opening relay. See CIRCUIT OPENING RELAY LOCATION table. On MPV 3.0L, disconnect airflow sensor connector.
- On all other models, disconnect fuel pump connector near fuel tank (on MPV 2.6L, Protege and 323, fuel pump connector is accessible from under rear seat cushion; on RX7 and 929, connector is on right side of trunk).
- On all models, allow engine to run until it stalls. Turn ignition off. Reconnect electrical connector.CIRCUIT OPENING RELAY LOCATION
Application Location B2200 PFI & B2600i Behind Left Kick Panel Miata To Left Of Steering Column MX-6 & 626 Near Fuse Block, On Relay Panel