Test C: Passenger's &/Or Rear Windows Inoperative Using Main Switch, Okay Using Sub-Switches
- Turn ignition on. Measure voltage at the following wire terminals of main switch connector with main switches in specified position. If battery voltage is present at all terminals, go to next step. If battery voltage is not present at all terminals, check main switch. See MAIN SWITCH
under COMPONENT TESTS.
- Red/White wire (main switch/passenger's in UP position).
- Green/White wire (main switch/passenger's in DOWN position).
- Red/Blue wire (main switch/left rear in UP position).
- Light Green/Red wire (main switch/left rear in DOWN position).
- Red/Yellow wire (main switch/right rear in UP position).
- Green/Yellow wire (main switch/right rear in DOWN position).