LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 1991 >> 323 Base, Automatic >> Repair and Diagnosis >> Engine Performance >> Remove, Overhaul & Install >> Engine Controls - Remove/Install/Overhaul >> Removal & Installation >> Fuel Line Connectors (NAVAJO) >> Spring Lock Coupler (Disconnecting)

Spring Lock Coupler (Disconnecting)

  1. Release fuel system pressure. See FUEL SYSTEM PRESSURE RELEASE  . Remove locking (safety) clip (if equipped). Place Spring Lock Coupler Releaser (49UN01051 for 3/8" line; 49UN01052 for 1/2" line) over fuel line coupler. See Figure .
  2. Push spring lock coupler releaser to release female fitting from garter spring. Pull spring lock coupler apart. Remove releaser.
scientia non olet · About LEMON Manuals