LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 1990 >> RX-7 Base, Standard >> Repair and Diagnosis >> Transmission >> Automatic Trans >> Servicing - A/T >> Neutral Safety Switch Adjustment

Neutral Safety Switch Adjustment

  1. Place gearshift lever in Neutral position. Ensure gearshift cable is adjusted correctly. See appropriate GEARSHIFT LINKAGE ADJUSTMNENT under GEARSHIFT LINKAGE ADJUSTMENTS . Loosen neutral safety switch bolts at transmission. Remove screw from alignment pin hole at bottom of switch.
  2. On B2600i and MPV (3.0L), rotate switch and insert a 5/32" (4.0 mm) alignment pin (or drill bit) through alignment holes. On all other models, insert a 5/64" (2.0 mm) alignment pin (or drill bit) through alignment holes.
  3. On all models, tighten bolts and remove alignment pin. Install alignment pin hole screw and check switch operation. Vehicle should start in "P" and "N" positions only.
scientia non olet · About LEMON Manuals