LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 1990 >> 929 Base >> Repair and Diagnosis >> Accessories & Equipment >> Wiper/Washer Systems >> Component Testing >> Testing Rear Wiper Motor Operational Check >> Except RX7

Except RX7

  1. Disconnect wiper motor electrical connector. Ensure continuity exists between terminals "A" and "B". Apply battery voltage to terminal "A" and ground to terminal "B". Motor should operate continuously at normal speed.
  2. To check operation of automatic stop, run motor as in step 1). Disconnect ground from terminal "B" and connect it immediately to motor body. Ensure motor shaft returns to park position.