LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 1990 >> 323 Base, Automatic >> Repair and Diagnosis >> External Pages >> Different car >> Section 17 (Overhaul - G4AX-El) >> On-Vehicle Service >> Torque Converter

Torque Converter

WARNING: This page is about a different car, the 1991 Mazda Protege and 1990 Mazda Protege. However, it is still accessible from the selected car via links, so may be relevant.
  1. Torque converter is a sealed unit and cannot be disassembled for service. Inspect for damage and cracks. Replace torque converter if defective. Remove any rust from pilot hub and boss of converter. If converter boss bushing inner diameter exceeds 2.090" (53.08 mm), replace torque converter.
  2. Flush torque converter. After converter is removed from cleaner, thoroughly drain solvent through hub. Add about .53 qt. (.5L) clean ATF to converter. Agitate fluid by hand. Drain ATF from converter.
scientia non olet · About LEMON Manuals