LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 1990 >> 323 Base, Automatic >> Repair and Diagnosis >> External Pages >> Different car >> Section 17 (Overhaul - G4AX-El) >> Component Disassembly & Reassembly >> Differential Assembly >> Disassembly

Differential Assembly: Disassembly

WARNING: This page is about a different car, the 1991 Mazda Protege and 1990 Mazda Protege. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove roll pin and pinion shaft. See Figure . Remove pinions and rotate thrust washers out of gear case.
  2. Remove side gears and thrust washers. Using a bearing puller, remove speedometer drive gear and rear bearing. DO NOT  remove speedometer drive gear unless damaged. Remove front bearing.
scientia non olet · About LEMON Manuals