LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 1990 >> 323 Base, Automatic >> Repair and Diagnosis >> Engine Performance >> Remove, Overhaul & Install >> Engine Controls - Remove/Install/Overhaul >> Fuel System >> Fuel Rails & Injectors >> Removal & Installation (Miata)

Removal & Installation (Miata)

  1. Disconnect negative battery cable. Remove air valve and PCV valve. Remove vacuum and fuel hoses. Disconnect injector electrical connectors. Remove grommets, injectors and insulators from fuel rail.
  2. To install, reverse removal procedure. Use new injector "O" rings. Apply a small amount of engine oil to "O" rings before installation. See TORQUE SPECIFICATIONS  table.
scientia non olet · About LEMON Manuals