LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 1989 >> RX-7 Base, Automatic >> Repair and Diagnosis >> Transmission >> Automatic Trans >> Servicing - A/T >> Adjustments >> Gearshift Linkage

Gearshift Linkage

  1. Remove boot plate. Place gearshift lever in the "P" position. From inside passenger compartment, loosen 2 lock nuts on connector link at bottom of gearshift lever. Move transmission lever to the "P" position (first detent to the rear of transmission).
  2. Tighten front lock nut until it just touches adjustment lever. Back off front lock nut one turn. Tighten rear lock nut to 69-96 INCH lbs. (7.8-11.0 N.m). Place gearshift lever in each position to ensure transmission shifts correctly.
scientia non olet · About LEMON Manuals