LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 1989 >> 323 Base, 2D Hatchback, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 4 (System/Component Tests) >> Fuel System >> By-Pass Air Control (BAC) System >> BAC Valve

BAC Valve

WARNING: This page is about a different car, the 1989 Mazda RX-7. However, it is still accessible from the selected car via links, so may be relevant.
  1. Disconnect valve connector. Using ohmmeter, check resistance between valve terminals. Resistance should be 10.7-12.3 ohms. Apply battery voltage and ground to valve terminals.
  2. Listen for operating sound from valve. Replace valve if resistance is not within specification or no operating sound exists.
scientia non olet · About LEMON Manuals