LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 1988 >> RX-7 SE, Standard >> Repair and Diagnosis >> Engine Performance >> System >> Air Management System >> Inspection >> Secondary Air Injection Control System >> Split Air Solenoid Valve (M/T Models)

Split Air Solenoid Valve (M/T Models)

  1. Connect voltmeter at BLK/WHT (turbo) or BLU/BLK (non-turbo) wire terminal and ground of solenoid valve.
  2. Turn ignition on. Place transmission in 5th gear and note voltage. Voltage should be below 2.5 volts in 5th gear and approximately 12 volts in all other gears.
scientia non olet · About LEMON Manuals