LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 1988 >> 626 Base, 4D Hatchback >> Repair and Diagnosis >> Engine Performance >> System >> EGI Control System >> Diagnosis & Testing >> Component Testing >> Inhibitor Switch (A/T)

Inhibitor Switch (A/T)

  1. Disconnect White 3-pin connector near battery. Measure resistance between Black/Yellow wire and Black/Red wire.
  2. With selector lever in "P" or "N", resistance should be zero ohms. With selector lever in any other position, resistance should be infinite.
scientia non olet · About LEMON Manuals