LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 1988 >> 323 GT >> Repair and Diagnosis >> Engine Performance >> System >> EGI Control System >> Diagnosis & Testing >> Component Testing >> Inhibitor Switch (A/T)

Inhibitor Switch (A/T)

  1. Disconnect 4-pin connector near battery. Measure resistance between terminal on 2 wire side of connector.
  2. With selector lever in "P" or "N", resistance should be zero ohms. With selector lever in any other position, resistance should be infinite.
scientia non olet · About LEMON Manuals