Maintenance Service Reminder Reset - Procedure 01
The Maintenance Monitor notification timing can be reset according to either the remaining travel distance or remaining days by performing the following procedure:
NOTE:
- Because the time information is reset after the negative battery cable is disconnected, the regular inspection period cannot be set using days. If the time information is reset, move the vehicle outdoors where reception of time information via GPS is possible.
- After verifying that the time is displayed on the multi information display, perform the day-setting procedure for the regular inspection period.
- Do not place objects around the GPS antenna, otherwise the GPS signal cannot be received.
- Press the INFO SWITCH to display the SETTINGS menu. See Fig 1.
- When the MAINTENANCE menu is displayed, press the ENTER switch.
- Select TIRE ROTATION or SERVICE DUE and press the ENTER switch.
- Select SET and press the ENTER switch.
- If SERVICE DUE is selected, select either DISTANCE or DAYS and press the ENTER switch.
- If TIRE ROTATION is selected, the SET DISTANCE screen is displayed.
- The screen for setting the next distance or days (SERVICE DUE only) to maintenance is displayed. The initial setting corresponding to the maintenance schedule is displayed.
- To change the set value, operate the UP/DOWN switch and change the setting.
- Press the ENTER switch.