LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 1988 >> 323 Base, 2D Hatchback >> Repair and Diagnosis >> Engine Performance >> System >> EGI Control System >> Diagnosis & Testing >> Without Self-Diagnostic Checker >> Clearing Trouble Codes

Clearing Trouble Codes

  1. Disconnect negative battery cable. Depress brake pedal for at least 5 seconds. Reconnect battery cable.
  2. Ground test connector with jumper wire. Turn ignition on, but do not start engine for 6 seconds.
  3. Start engine and run at 2000 RPM for 2 minutes. Verify no codes are displayed.
Fig 1: Trouble Code I.D. (1 of 2)
G94775
Fig 2: Trouble Code I.D. (2 of 2)
G94776
scientia non olet · About LEMON Manuals