LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 1987 >> B2000 Base, 2D Pickup >> Repair and Diagnosis >> Transmission >> Automatic Trans >> Servicing - A/T >> Adjustments >> Neutral Safety Switch

Neutral Safety Switch

  1. Place gearshift lever in Neutral. Make sure gearshift cable is adjusted correctly. Loosen neutral safety switch attaching bolts at transmission. Remove screw from alignment pin hole from bottom of switch.
  2. Rotate switch and insert a .079" (2.0 mm) alignment pin through alignment holes. Tighten attaching bolts and remove alignment pin. Install alignment pin hole screw and check operation of switch. Vehicle should start in "P" and "N" positions only.
scientia non olet · About LEMON Manuals