LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 1987 >> 323 DX, 2D Hatchback, Automatic >> Repair and Diagnosis >> Engine Performance >> System >> Fuel Injection System - BOSCH AFC >> Removal & Installation >> Throttle Position Sensor >> Removal & Installation

Removal & Installation

  1. Disconnect negative battery cable. Unplug TPS electrical connector. Remove 2 screws securing TPS to housing. Remove by slowly pulling sensor off throttle shaft.
  2. To install, reverse removal procedure. Make sure sensor is aligned on throttle shaft and after replacement, perform TPS adjustment. See ADJUSTMENTS  .
scientia non olet · About LEMON Manuals