LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 1987 >> 323 Base, 2D Hatchback >> Repair and Diagnosis >> Engine Performance >> System >> Fuel INJ - MPFI System >> Diagnosis >> Diagnostic Procedure >> Code 1 (Ignition Pulse)

Code 1 (Ignition Pulse)

  1. Ensure that negative terminal of ignition coil is properly connected. With ignition coil terminal properly connected, check that "1M" (323) terminal voltage at ECU is between 12-13 volts.
  2. If voltage is correct, replace faulty ECU. If voltage is incorrect, check for open or short circuit in wiring harness from ignition coil to terminal "1M" (323) of ECU connector.
scientia non olet · About LEMON Manuals