LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 1987 >> 323 Base, 2D Hatchback >> Repair and Diagnosis >> Engine Performance >> System >> Fuel Evaporation System >> Component Testing >> Water THERMO Valve >> 626

Water THERMO Valve: 626

  1. Remove water thermo valve. Connect a piece of tubing to each nipple. Immerse valve in container of water. Insert thermometer and slowly heat water.
  2. At temperature greater than 131°F (55°C) on 626, blow into one of the hoses. Air should pass through valve. If not, replace water thermo valve.
scientia non olet · About LEMON Manuals