Differentials & Drive Axles: Description

Rear axle housing on B2000 is banjo type with removable differential carrier and semi-floating drive axles. RX7 uses half-shaft type drive axles. Both models use a hypoid type ring and pinion. Centerline of pinion is set below centerline of ring gear. On RX7, an optional clutch pack Limited Slip Differential (LSD) is available.

The differential case may be either 2 pinion (normal differential) or 4 pinion (LSD differential) design. On B2000, drive axles are retained in the housing by tapered bearings and bearing retainers at axle housing outer ends. On RX7, drive axles use CV joints to connect drive axles.