LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 1986 >> 626 Base >> Repair and Diagnosis >> External Pages >> Different car >> Section 6 (Generator & Regulator) >> Removal / Installation >> Generator

Removal / Installation: Generator

WARNING: This page is about a different car, the 1998 Mazda Protege, 1998 Mazda Millenia, 1998 Mazda MPV, and 1998 Mazda 626. However, it is still accessible from the selected car via links, so may be relevant.
WARNING:
  • When the battery cables are connected, touching the vehicle body with generator terminal B will generate sparks. This can cause personal injury, fire, and damage to the electrical components. Always disconnect the battery before performing the following operation.
  1. Disconnect the negative battery cable.
  2. Remove in the order indicated in the table.
  3. Install in the reverse order of removal.
Fig 1: Generator Removal Steps With Torque Specifications
G00562836Courtesy of MAZDA MOTORS CORP.
GENERATOR REMOVAL & INSTALLATION COMPONENTS

1 Drive belt
2 P/S pump pulley
Refer to POWER STEERING PUMP
3 Generator