LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 1986 >> 626 Base >> Repair and Diagnosis >> External Pages >> Different car >> Section 12 (Engine Controls - Remove/Install/Overhaul) >> Ignition System >> Ignition Control Module >> Removal & Installation (Millenia 2.3L)

Removal & Installation (Millenia 2.3L)

WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 1998 Mazda Protege, 1998 Mazda Millenia, 1998 Mazda MPV, 1998 Mazda B4000, and 1998 Mazda B3000. However, it is still accessible from the selected car via links, so may be relevant.

Each ignition coil has an integral control module. To remove coil(s) on front cylinder head, remove charge air cooler. To remove coil(s) on rear cylinder head, remove solenoid bracket. On all coils, disconnect wiring. Remove mounting bolts and coil assembly. To install, reverse removal procedure.

scientia non olet · About LEMON Manuals