LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 1986 >> 626 Base >> Repair and Diagnosis >> External Pages >> Different car >> Section 12 (Engine Controls - Remove/Install/Overhaul) >> Ignition System >> Distributor >> Removal & Installation

Removal & Installation

WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 1998 Mazda Protege, 1998 Mazda Millenia, 1998 Mazda MPV, 1998 Mazda B4000, and 1998 Mazda B3000. However, it is still accessible from the selected car via links, so may be relevant.

Disconnect negative battery cable. Move any hoses, wiring or components interfering with distributor removal. Reference mark high tension wires to distributor cap and disconnect all wiring from distributor. Remove distributor cap. Remove hold-down bolt and distributor. To install, reverse removal procedure. Adjust ignition timing. See ADJUSTMENTS article.

scientia non olet · About LEMON Manuals