LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 1986 >> 626 Base >> Repair and Diagnosis >> External Pages >> Different car >> Section 12 (Engine Controls - Remove/Install/Overhaul) >> Ignition System >> Camshaft Position (CMP) Sensor >> Removal & Installation (Millenia 2.3L)

Removal & Installation (Millenia 2.3L)

WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 1998 Mazda Protege, 1998 Mazda Millenia, 1998 Mazda MPV, 1998 Mazda B4000, and 1998 Mazda B3000. However, it is still accessible from the selected car via links, so may be relevant.

Camshaft Position (CMP) sensor is located on front of cylinder head. To remove, disconnect sensor connector. Remove hold-down bolt. Remove sensor. To install, reverse removal procedure. Adjust ignition timing. See ADJUSTMENTS article. Tighten bolt to specification. See TORQUE SPECIFICATIONS .

scientia non olet · About LEMON Manuals