Steering Gear: Remove & Replace
Includes: Adjust toe-in on Rack and Pinion type Steering Gears. NOTE: Deduct .4 if alignment is also performed.
| Applies To | Note | Standard Hours | Warranty Hours | Skill Level |
|---|
| Rack & Pinion Type Gears,Manual Strg | | 1.9 | | B |
| Rack & Pinion Type Gears,Power Strg,2WS,w/ECPS | | 3.8 | | B |
| Rack & Pinion Type Gears,Power Strg,2WS,w/o ECPS | | 3.4 | | B |
| Rack & Pinion Type Gears,Power Strg,4WS,Front | | 4.7 | | B |
| Rack & Pinion Type Gears,Power Strg,4WS,Rear | | 4.5 | | B |
| Worm & Ball Nut Type Gears,Worm & Piston Strg,Manual Strg | | 2.2 | | B |
| Worm & Ball Nut Type Gears,Worm & Piston Strg,Power Strg | | 2.4 | | B |
| Combination Procedure: TIE ROD &/OR END: Replace: |
| Each | | 0.1 | | B |