LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 1985 >> RX-7 S >> Repair and Diagnosis >> Engine Performance >> Ignition System >> Adjustments >> RELUCTOR-To-Pick-Up Coil Air Gap

RELUCTOR-To-Pick-Up Coil Air Gap

  1. Remove distributor cap and rotor. Turn distributor shaft until the extended tooth of the reluctor (signal rotor) aligns with core of pick-up coil. See Fig 1.
  2. Using a feeler gauge, check for .020-.035" (.5-.9 mm) air gap. If gap is incorrect, replace pick-up coil and bearing assembly or distributor drive shaft, as required.
Fig 1: Measuring Distributor Air Gap. Check Air Gap At All Teeth And Both Pick-Up Coils.
G29013
scientia non olet · About LEMON Manuals