LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 1985 >> RX-7 GSL, Automatic >> Repair and Diagnosis >> Engine Performance >> System >> CEC System/Tests - EFI >> Testing >> Water THERMO Valve Check

Water THERMO Valve Check

  1. Remove water thermo valve from engine. Immerse water thermo valve in a container of water.
  2. Heat up water gradually and observe the temperature. Below approx. 140°F (60°C) air should pass from top vacuum line to bottom vacuum line. Above approx. 140°F (60°C) air should pass from bottom vacuum line too orifice on top of thermo valve.
scientia non olet · About LEMON Manuals