LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 1984 >> B2000 Base, Automatic >> Repair and Diagnosis >> Transmission >> Automatic Trans >> Servicing - A/T >> Adjustments >> Gearshift Linkage >> B2000

Gearshift Linkage: B2000

  1. Place selector lever in "N" position. Raise vehicle and support with safety stands. Disconnect "T" joint from lower end of selector lever arm. Move transmission lever to Neutral, third detent position from rear of transmission.
  2. Loosen "T" joint lock nuts, adjust "T" joint so that it freely enters hole of selector lever arm and tighten lock nuts. Connect "T" joint to selector lever arm and secure using retaining clip. Lower vehicle, place selector lever in each position to ensure that selector lever functions properly.
scientia non olet · About LEMON Manuals