LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 1983 >> RX-7 GSL, Automatic >> Repair and Diagnosis >> Engine Performance >> System >> Choke - Electric Assist >> Component Testing >> Hot Start Assist Relay

Hot Start Assist Relay

  1. Disconnect electrical connector from hot start relay. Using an ohmmeter, check continuity between terminals. Continuity should exist between terminals No. 1 and No. 5 without power applied. Continuity should not exist between terminals No. 1 and No. 3 without power applied.
  2. Connect battery power to relay (positive to terminal No. 2, negative to terminal No. 4). With battery power applied, continuity should exist between terminals No. 1 and No. 3. Continuity should not exist between terminals No. 1 and No. 5 with power applied.
Fig 1: Hot Start Assist Relay Terminal Numbering
G41386
scientia non olet · About LEMON Manuals