LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 1982 >> B2000 Base >> Repair and Diagnosis >> Engine Mechanical >> Exhaust >> Air Pump Air Injection >> Testing >> Relief Valve

Relief Valve

  1. Run engine at idle speed. Hold hand near relief valve. No air should be felt at idle. Disconnect and plug vacuum sensing tube from No. 2 air control valve (GLC only).
  2. On all models, increase engine speed to 4000-4500 RPM. Check relief valve. Air should flow from relief valve.
scientia non olet · About LEMON Manuals