LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 1982 >> B2000 Base >> Repair and Diagnosis >> Electrical >> Charging Systems >> SEV MOTOROLA Alternators >> Overhaul >> Parts Replacement >> Diodes

Parts Replacement: Diodes

  1. Mark leads connecting stator to diodes, quickly and carefully unsolder leads. Place new diode holder in exact position of holder being replaced.
  2. Solder new leads while holding with pliers acting as a heat sink. Use minimum 100-watt, well-heated soldering iron. Never change places of diode holders.
  3. Positive holder is isolated from frame by means of isolation washers and sleeves, and its diodes are marked in red. Negative holder is not isolated and its diodes are marked in black.
    CAUTION: Heat sink must be used during soldering to avoid damage to diodes from overheating.
scientia non olet · About LEMON Manuals